[phpBB Debug] PHP Notice: in file /viewtopic.php on line 990: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 990: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
Vmax Club Sweden • View topic - Lameller
Page 1 of 1

Lameller

PostPosted: 17 Dec 2019, 17:56
by bakhjul
Vad byter ni till för lameller, och stålskivor när det är dags för byte?

Re: Lameller

PostPosted: 19 Dec 2019, 12:48
by Bear
Hej Bengan!
Jag satte dit Barnett och en extra fjäderplatta från Yamaha.
Kopplingen blir lite hårdare men istället så har den inte slirat det minsta på 5000 mil. :thumbup:

Re: Lameller

PostPosted: 19 Dec 2019, 22:58
by Ynnoc
Tjena !
Bytte till original lameller och extra tryckplatta vid 1800 mil.
Nu cirka 3500 mil senare bara att det slirar mellan gummi och asfalt :D

Re: Lameller

PostPosted: 20 Dec 2019, 01:14
by bakhjul
Ok! Då har jag ett par varianter att fundera på..! Tack för tipsen! :bow: